Home Care Toilet Solution: A compact dry-flush system with tailored support, making premium comfort completely effortless.

Yes. The toilet seat features a spacious opening length of 11.41 inches and a width of 7.87 inches, comfortably designed for adults and seniors alike.

Highly suitable. The device does not rely on plumbing, is 100% odor-free, and stays completely silent on standby. The sealing process produces very little noise, ensuring it won't disturb family members' sleep.

The operation is extremely minimalistic. The entire sealing process requires no manual intervention—simply press the "Start" button once, and the machine automatically feeds the bag, wraps, and heat-seals the waste.

Yes. You can use the standard charger to plug it into a household 100-240V outlet. Once the battery reaches 100%, it will automatically stop charging to prevent overcharging.

Yes. The machine features a built-in lithium battery. During a power outage, a fully charged battery can still support approximately 70-100 consecutive sealing operations.

The device will not execute the seal. If there is no operation within 60 seconds after turning it on, the machine automatically goes into sleep mode to save power. Pressing any button on the control panel will wake it up when needed.

Not at all. Once packaged, the waste is completely sealed inside a dry plastic bag. Caregivers simply discard it the same way they would dispose of adult diapers.

To prevent the bag from slipping due to the heavy weight of collected urine, we recommend a "one-click, one-seal" approach for solid waste. For large volumes of liquid waste, we recommend using our provided 2L urine container directly.

Yes. For daily cleaning, simply wipe down the exterior casing. However, please note that the device is not waterproof—never wash the control panel with running water or allow water to flow into the internal mechanics.

Once opened, the bags come into direct contact with the air, so we recommend using them within 3 months. If left open for too long, the bags may become brittle. Please perform a water-fill and stretch test before use.

If there is no power, please check if the main power switch on the back of the LE-310 is turned on. For the R1808, check the 7.5A red fuse at the bottom. An E4 error is usually caused by unevenly pulled bag film; please visit our [Technical Support Center Link].